Ann-I/O Led Driver Module - Fire-Lite MS-9200UDLS Manual

Accessories

ANN-I/O LED Driver Module

The ANN-I/O is an LED driver module that can be used in a wide variety of applications, including
as an interface with most customized graphic annunciators. The ANN-I/O can drive up to 40
LEDs. The module is provided with a plastic wall mount. The following sections describe hard-
ware installation. Refer to the section titled "ANN-BUS Options" on page 120 for programming
information.
ANN-I/O Board Layout

Figure 1.8 illustrates the ANN-I/O board showing locations of screw terminals for connection to
the FACP, pin connectors for connecting LEDs and the DIP switch for selecting the ANN-BUS ID
number.
Specifications

• Max. ANN-BUS Voltage: 28 VDC
• Max. Current:
Alarm: 200 mA

Standby: 35 mA

Each LED: 10 mA

• Operating Temperature: 32
• For indoor use in a dry location only
MS-9200UDLS/E/C Manual — P/N 52750:F 7/26/2010
Terminals not used (future)
ANN-BUS Connector
Figure 1.8 ANN-I/O Board Layout
o F to 120 o F (0 o C to 49
ANN-BUS (ID#)
Address DIP
switch
o C)
Product Description
33