Remote Fire Annunciator - Fire-Lite MS-9200UDLS Manual

Accessories
Switch 5 must be set to OFF for ANN-BUS devices to be recognized.
ANN-80 Remote Fire Annunciator
The ANN-80 Annunciator is a compact, 80 character, backlit LCD remote fire annunciator. It
mimics the display on the control panel and will annunciate device type, point alarm, trouble or
supervisory condition, zone assignment plus any custom alpha labels programmed into the FACP.
The annunciator also provides system status LEDs to display AC Power, Alarm, Trouble, Supervi-
sory and Alarm Silenced conditions. Additionally, the annunciator is capable of remotely perform-
ing critical system functions such as Acknowledge, Silence, Reset and Drill. Communication
between the ANN-80 and FACP is accomplished over a two wire RS-485 serial interface employ-
ing the ANN-BUS communication format. The devices are powered, via two additional wires,
from either the host FACP or remote UL-listed, filtered, power supply.
The function buttons, keyswitch and piezo sounder may be individually enabled and disabled
through the FACP software. Refer to "ANN-80 Options" on page 132 for a description of this fea-
ture and programming information.
Note that if the keyswitch is enabled and remains in the unlocked position for more than two min-
utes without any buttons being pressed on the annunciator, a trouble indication will be annunciated.
The ANN-80C (for Canadian applications) does not provide FACP control for Acknowledge,
Reset, Silence, or Drill.
Specifications

• Operating Voltage Range: 18 VDC to 28 VDC
• Current Consumption @ 24 VDC nominal (filtered and nonresettable):
Normal/Standby (no activity): 37.0 mA

Trouble: 39.0 mA

Alarm: 40.0 mA

AC Fail ( not backlit): 15.0 mA

• For use indoors in a dry location
Installation

Ensure that all power (AC and DC) has been removed from the FACP before installing the annunci-
ator.
MS-9200UDLS/E/C Manual — P/N 52750:F 7/26/2010
Address Switch 5
not valid OFF OFF
01 OFF OFF
02 OFF OFF
03 OFF OFF
04 OFF OFF
05 OFF OFF
06 OFF OFF
07 OFF OFF
08 OFF ON
Switch 4 Switch 3
OFF OFF
OFF OFF
OFF ON
OFF ON
ON OFF
ON OFF
ON ON
ON ON
OFF OFF
Product Description
Switch 2 Switch 1
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
27