Programming
1=STANDARD ADJECTIVE
2=STANDARD NOUN
3=CUSTOM ADJECTIVE
4=CUSTOM NOUN
Noun/Adjective Screen
**********************
1=NORTH
2=SOUTH
3=EAST
**********************
1=REAR
2=UPPER
3=LOWER
**********************
1=3RD
2=4TH
3=5TH
**********************
1=FLOOR 4
2=FLOOR 5
3=ROOM
90
Pressing 1 while viewing the Noun/Adjective Screen will cause the following screen(s) to be
displayed. Note that the keyboard down arrow key must be pressed to see all the Adjective screens.
Press the number corresponding to the adjective that is to be used as a descriptor for the location of
the control module currently being programmed.
Adjective Screen #1
Adjective Screen #3
Adjective Screen #5
Adjective Screen #7
**********************
1=WEST
2=FRONT
3=CENTER
Adjective Screen #2
**********************
1=MAIN
2=FIRST
3=2ND
Adjective Screen #4
**********************
1=FLOOR 1
2=FLOOR 2
3=FLOOR 3
Adjective Screen #6
MS-9200UDLS/E/C Manual — P/N 52750:F 7/26/2010
Master Programming Level