9: Option Modules; Annunciators - Fire-Lite MS-9200UDLS Manual

Addressable fire alarm control panel
Hide thumbs Also See for MS-9200UDLS:
Table of Contents

Advertisement

Master Programming Level
3.6.9 Option Modules
PROGRAMMING
Options available for the MS-9200UDLS include ANN-BUS annunciators, legacy ACS BUS
1=HISTORY
annunciators, and the LCD-80F Terminal Mode annunciator, printer connection for acquiring
2=WALKTEST
hardcopy printouts of panel data, and PC (Personal Computer) connection for uploading and
3=OPTION MODULES
downloading panel data.
Programming Screen #3
Pressing 3 while viewing Programming Screen #3 will display the following screen:
Note that PR4800 in the display indicates that a supervised printer, configured for 4800 baud, has
been previously programmed into the system.

Annunciators

Pressing 1 while viewing the Options Screen will cause the control panel to display the following
screens:
An LCD-80F Terminal Mode annunciator, ACS BUS annunciator, or ANN-BUS
annunciator/module can be installed in the MS-9200UDLS system. Refer to "Guidelines" on
page 22 for rules governing the use of various annunciator types. Do not use a mix of ACS
annunciators and ANN annunciators since they use different communication protocols. ACS or
ANN annunciators use the same TB9 terminal block connection. To install any of these devices,
press the number corresponding to the desired device shown in the Annunciator Screen.
While viewing the Annunciators screen, each press of the 1 key for Term Enabled, will cause the
display to toggle between Term Enabled No and Term Enabled Yes.
Notes:
1.
2.
MS-9200UDLS/E/C Manual — P/N 52750:F 7/26/2010
1=ANNUNCIATORS
2=ONBOARD DACT
3=PRINTER/PC
1=TERM ENABLED
2=ACS OPTIONS
3=ANN-BUS OPTIONS
Term Options
The LCD-80F is a Terminal Mode annunciator. To enable the MS-9200UDLS for -LCD-80F
operation, press 1 for Term Enabled Yes.
The Terminal Mode annunciator (LCD-80F) and the Printer/PC use the same TB8 terminal
block on the MS-9200UDLS main circuit board. Only one device can be connected at one
time, therefore, enabling an annunciator in the Term Option will disable any Printer/PC com-
munications.
OPTION MODULES
PR4800
Options Screen
ANNUNCIATORS
Programming
NO
117

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms-9200udlseMs-9200udlsc

Table of Contents