Type Monitor - Fire-Lite MS-9200UDLS Manual

Programming

Type Monitor

EDIT MONITOR
1=ENABLED
Using the PS-Tools Upload/Download utility program, unique user-defined monitor types can be
2=TYPE MONITOR
created and loaded into the FACP for later use. The FACP response to the activation of a user-
defined type is the same as most previous standard types in the list, thus allowing a variety of user-
Edit Monitor Screen #2
defined types and responses. To select the type of monitor module being programmed, press the 2
key while viewing the Edit Monitor Screen #2. This will cause the control panel to display the
following Monitor Type Screens:
Pressing the down arrow key will display additional Monitor Type screens. While viewing one of
the Monitor Type screens, select the type of monitor module being programmed by pressing the
corresponding keypad number key. The display will return to the Edit Monitor Screen #2 which
will show the new type selection.
Table 3.1 on page 81 lists the Monitor Types and their respective functions.
80
MONITOR TYPE
1=PULL-STATION
2=USER-DEFINED-1
3=WATERFLOW
Monitor Type Screen #1
MS-9200UDLS/E/C Manual — P/N 52750:F 7/26/2010
Master Programming Level