System Management Commands
show sessions
The show sessions User EXEC mode command lists open Telnet sessions.
Syntax
show sessions
Parameters
There are no parameters for this command.
Default Setting
There is no default configuration for this command.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command lists open Telnet sessions.
Console> show sessions
Connection
----------
1
2
The following table describes significant fields shown in the example.
Field
Connection
Host
Address
Port
Byte
25-12
Host
Address
-------------
----------
Remote device
172.16.1.1
172.16.1.2
172.16.1.2
Description
Connection number.
Remote host to which the device is connected through a Telnet session.
IP address of the remote host.
Telnet TCP port number
Number of unread bytes for the user to see on the connection.
www.hp.com
Port
Byte
-----
----
23
89
23
8
HP PC Blade Switch CLI Reference Guide