802.1x Commands
dot1x system-auth-control
The dot1x system-auth-control Global Configuration mode command enables 802.1x globally.
To return to the default configuration, use the no form of this command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Parameters
There are no parameters for this command.
Default Configuration
802.1x is disabled globally.
Command Modes
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command enables 802.1x globally.
Console(config)# dot1x system-auth-control
2-2
www.hp.com
HP PC Blade Switch CLI Reference Guide