Priority-Queue Out Num-Of-Queues - HP Bc1500 - BladeSystem - Blade PC Reference Manual

QoS Commands

priority-queue out num-of-queues

The priority-queue out num-of-queues Global Configuration mode command configures the
number of expedite queues. To return to the default configuration, use the no form of this
command.
Syntax
priority-queue out num-of-queues number-of-queues
no priority-queue out num-of-queues
Parameters
■
number-of-queues — Specifies the number of expedite queues. Expedite queues have higher
indexes. (Range: 0-4)
Default Setting
All queues are expedite queues.
Command Mode
Global Configuration mode
Command Usage
Configuring the number of expedite queues affects the Weighted Round Robin (WRR) weight
ratio because fewer queues participate in the WRR.
Example
The following command configures the number of expedite queues as 0.
Console(config)# priority-queue out num-of-queues 0
18-18 www.hp.com HP PC Blade Switch CLI Reference Guide