ip ssh pubkey-auth
The ip ssh pubkey-auth Global Configuration mode command enables public key
authentication for incoming SSH sessions. To disable this function, use the no form of this
command.
Syntax
ip ssh pubkey-auth
no ip ssh pubkey-auth
Parameters
There are no parameters for this command.
Default Setting
Public Key authentication for incoming SSH sessions is disabled.
Command Mode
Global Configuration mode
Command Usage
AAA authentication is independent
Example
The following command enables public key authentication for incoming SSH sessions.
Console(config)# ip ssh pubkey-auth
HP PC Blade Switch CLI Reference Guide
www.hp.com
SSH Commands
23-5