Rmon Alarm - HP Bc1500 - BladeSystem - Blade PC Reference Manual

rmon alarm

The rmon alarm Global Configuration mode command configures alarm conditions. To remove
an alarm, use the no form of this command.
Syntax
rmon alarm index variable interval rthreshold fthreshold revent fevent [type type] [startup
direction] [owner name]
no rmon alarm index
Parameters
■
index — Specifies the alarm index. (Range: 1-65535)
■
variable — Specifies the object identifier of the variable to be sampled.
■
interval — Specifies the interval in seconds during which the data is sampled and compared
with rising and falling thresholds. (Range: 1-4294967295)
■
rthreshold — Specifies the rising threshold. (Range: 0-4294967295)
■
fthreshold — Specifies the falling threshold. (Range: 0-4294967295)
■
revent — Specifies the event index used when a rising threshold is crossed.
(Range: 1-65535)
■
fevent — Specifies the event index used when a falling threshold is crossed.
(Range: 1-65535)
■
type — Specifies the method used for sampling the selected variable and calculating the
value to be compared against the thresholds. Possible values are absolute and delta.
■
If the method is absolute, the value of the selected variable is compared directly with the
thresholds at the end of the sampling interval. If the method is delta, the selected variable
value of the last sample is subtracted from the current value, and the difference is compared
with the thresholds.
■
direction — Specifies the alarm that may be sent when this entry is first set to valid. Possible
values are rising, rising-falling and falling.
If the first sample (after this entry becomes valid) is greater than or equal to rthreshold and
direction is equal to rising or rising-falling, a single rising alarm is generated. If the first
sample (after this entry becomes valid) is less than or equal to fthreshold and direction is
equal to falling or rising-falling, a single falling alarm is generated.
■
name — Specifies the name of the person who configured this alarm. If unspecified, the
name is an empty string.
Default Setting
The type is absolute.
The startup direction is rising-falling.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
HP PC Blade Switch CLI Reference Guide www.hp.com
RMON Commands
20-9