Ip Access-List - HP Bc1500 - BladeSystem - Blade PC Reference Manual

ip access-list

The ip access-list Global Configuration command enables the IP-Access Configuration mode
and creates Layer 3 ACLs. To delete an ACL, use the no form of this command.
Syntax
ip access-list name
no ip access-list name
Parameters
■
name — Specifies the name of the ACL.
Default Setting
The default for all ACLs is deny-all.
Command Mode
Global Configuration mode
Command Usage
Up to 1018 rules can be defined on the device, depending on the type of rule defined.
Example
The following command creates an IP ACL.
Console(config)# ip access-list ip-acl1
Console(config-ip-al)#
HP PC Blade Switch CLI Reference Guide
ACL Commands
www.hp.com
4
4-1