Snmp-Server Group - HP Bc1500 - BladeSystem - Blade PC Reference Manual

SNMP Commands

snmp-server group

The snmp-server group Global Configuration mode command configures a new Simple
Management Protocol (SNMP) group or a table that maps SNMP users to SNMP views. To
remove a specified SNMP group, use the no form of this command.
Syntax
snmp-server group groupname {v1 | v2 | v3 {noauth | auth | priv} [notify notifyview]}
[read readview] [write writeview]
no snmp-server group groupname {v1 | v2 | v3 [noauth | auth | priv]}
Parameters
■
groupname—Specifies the name of the group.
■
v1 — Indicates the SNMP Version 1 security model.
■
v2 — Indicates the SNMP Version 2 security model.
■
v3 — Indicates the SNMP Version 3 security model.
■
noauth — Indicates no authentication of a packet. Applicable only to the SNMP Version 3
security model.
■
auth — Indicates authentication of a packet without encrypting it. Applicable only to the
SNMP Version 3 security model.
■
priv — Indicates authentication of a packet with encryption. Applicable only to the SNMP
Version 3 security model.
■
readview — Specifies a string that is the name of the view that enables only viewing the
contents of the agent. If unspecified, all objects except for the community-table and
SNMPv3 user and access tables are available.
■
writeview — Specifies a string that is the name of the view that enables entering data and
configuring the contents of the agent. If unspecified, nothing is defined for the write view.
■
notifyview — Specifies a string that is the name of the view that enables specifying an inform
or a trap. If unspecified, nothing is defined for the notify view. Applicable only to the SNMP
Version 3 security model.
Default Setting
No group entry exists.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command attaches a group called user-group to SNMPv3 and assigns to the group
the privacy security level and read access rights to a view called user-view.
Console(config)# snmp-server group user-group v3 priv read user-view
21-4 www.hp.com HP PC Blade Switch CLI Reference Guide