Snmp-Server Set - HP Bc1500 - BladeSystem - Blade PC Reference Manual

snmp-server set

The snmp-server set Global Configuration mode command defines the SNMP MIB value.
Syntax
snmp-server set variable-name name1 value1 [ name2 value2 ...]
Parameters
■
variable-name — MIB variable name.
■
name value — List of name and value pairs. In the case of scalar MIBs, only a single pair
of name values. In the case of an entry in a table, at least one pair of name and value followed
by one or more fields.
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
Although the CLI can set any required configuration, there might be a situation where a SNMP
user sets a MIB variable that does not have an equivalent command. In order to generate
configuration files that support those situations, the snmp-server set command is used.
This command is case-sensitive.
Example
The following command configures the scalar MIB sysName with the value HP.
Console(config)# snmp-server set sysName sysname HP
HP PC Blade Switch CLI Reference Guide www.hp.com
SNMP Commands
21-17