RADIUS Commands
radius-server retransmit
The radius-server retransmit Global Configuration mode command specifies the number of
times the software searches the list of RADIUS server hosts. To reset the default configuration,
use the no form of this command.
Syntax
radius-server retransmit retries
no radius-server retransmit
Parameters
■
retries — Specifies the retransmit value. (Range: 1-10)
Default Setting
The software searches the list of RADIUS server hosts 3 times.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command configures the number of times the software searches the list of
RADIUS server hosts to 5 times.
Console(config)# radius-server retransmit 5
19-4
www.hp.com
HP PC Blade Switch CLI Reference Guide