Radius-Server Deadtime - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
radius-server deadtime
The radius-server deadtime Global Configuration mode command improves RADIUS response
time when servers are unavailable. The command is used to cause the unavailable servers to be
skipped. To return to the default configuration, use the no form of this command.
Syntax
radius-server deadtime deadtime
no radius-server deadtime
Parameters
■
deadtime — Length of time in minutes during which a RADIUS server is skipped over by
transaction requests. (Range: 0-2000)
Default Setting
The deadtime setting is 0.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command sets the deadtime to 10 minutes.
Console(config)# radius-server deadtime 10
HP PC Blade Switch CLI Reference Guide
www.hp.com
RADIUS Commands
19-7
Advertisement
Table of Contents
