Aaa Authentication Enable - HP Bc1500 - BladeSystem - Blade PC Reference Manual

aaa authentication enable

The aaa authentication enable Global Configuration mode command defines authentication
method lists for accessing higher privilege levels. To return to the default configuration, use the
no form of this command.
Syntax
aaa authentication enable {default | list-name} method1 [method2...]
no aaa authentication enable {default | list-name}
Parameters
■
default — Uses the listed authentication methods that follow this argument as the default list
of methods, when using higher privilege levels.
■
list-name — Character string used to name the list of authentication methods activated, when
using access higher privilege levels (Range: 1-12 characters).
■
method1 [method2...] — Specify at least one keyword from the following table:
Keyword
enable
line
none
radius
tacacs
Default Setting
If the default list is not set, only the enable password is checked. This has the same effect as the
command aaa authentication enable default enable.
On the console, the enable password is used if it exists. If no password is set, the process still
succeeds. This has the same effect as using the command aaa authentication enable default
enable none.
Command Mode
Global Configuration mode
Command Usage
The default and optional list names created with the aaa authentication enable command are
used with the enable authentication command.
The additional methods of authentication are used only if the previous method returns an error,
not if it fails. To ensure that the authentication succeeds even if all methods return an error,
specify none as the final method in the command line.
All aaa authentication enable default requests sent by the device to a RADIUS or TACACS+
server include the username $enabx$., where x is the requested privilege level.
HP PC Blade Switch CLI Reference Guide
Description
Uses the enable password for authentication.
Uses the line password for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication. Uses username
$enabx$., where x is the privilege level.
Uses the list of all TACACS+ servers for authentication. Uses username
"$enabx$." where x is the privilege level.
www.hp.com
AAA Commands
3-3