Tacacs-Server Key - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
tacacs-server key
The tacacs-server key Global Configuration mode command sets the authentication encryption
key used for all TACACS+ communications between the device and the TACACS+ daemon. To
disable the key, use the no form of this command.
Syntax
tacacs-server key key-string
no tacacs-server key
Parameters
■
key-string — Specifies the authentication and encryption key for all TACACS+
communications between the device and the TACACS+ server. This key must match the
encryption used on the TACACS+ daemon. (Range: 0-128 characters)
Default Setting
Empty string.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command sets the authentication encryption key.
Console(config)# tacacs-server key hp-s
HP PC Blade Switch CLI Reference Guide
www.hp.com
TACACS+ Commands
26-3
Advertisement
Table of Contents
