Sntp Unicast Client Enable - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
sntp unicast client enable
The sntp unicast client enable Global Configuration mode command enables the device to use
the Simple Network Time Protocol (SNTP) to request and accept SNTP traffic from servers. To
disable requesting and accepting SNTP traffic from servers, use the no form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Parameters
There are no parameters for this command.
Default Setting
The SNTP unicast client is disabled.
Command Mode
Global Configuration mode
Command Usage
Use the sntp server Global Configuration mode command to define SNTP servers.
Example
The following command enables the device to use the Simple Network Time Protocol (SNTP) to
request and accept SNTP traffic from servers.
Console(config)# sntp unicast client enable
HP PC Blade Switch CLI Reference Guide
www.hp.com
Clock Commands
6-13
Advertisement
Table of Contents
