802.1x Commands
show dot1x
The show dot1x Privileged EXEC mode command displays the 802.1x status of the device or
specified interface.
Syntax
show dot1x [ethernet interface]
Parameters
■
interface — Valid Ethernet port. (Full syntax: port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the status of 802.1x-enabled Ethernet ports.
Console# show dot1x
802.1x is enabled
Port
----
1/e1
1/e2
1/e3
1/e4
1/e5
* Port is down or not present.
Console# show dot1x ethernet 1/e3
802.1x is enabled.
Port
----
1/e3
2-12
Admin Mode
Oper Mode
----------
---------
Auto
Authorized
Auto
Authorized
Auto
Unauthorized
Force-auth
Authorized
Force-auth
Unauthorized*
Admin Mode
Oper Mode
----------
---------
Auto
Unauthorized
www.hp.com
Reauth Control
Reauth Period
-------
------
Ena
3600
Ena
3600
Ena
3600
Dis
3600
Dis
3600
Reauth Control
Reauth Period
-------
------
Ena
3600
HP PC Blade Switch CLI Reference Guide
Username
--------
Bob
John
Clark
n/a
n/a
Username
--------
Clark