RMON Commands
show rmon log
The show rmon log User EXEC mode command displays the RMON log table.
Syntax
show rmon log [event]
Parameters
■
event — Specifies the event index. (Range: 0 - 65535)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the RMON log table.
Console> show rmon log
Maximum table size: 500
Event
-------
1
1
Console> show rmon log 1
Maximum table size: 500 (800 after reset)
Event
-------
1
1
The following table describes the significant fields shown in the display:
Field
Event
Description
Time
20-16
Description
Time
--------------
---------
Errors
Jan 18 2005 23:48:19
Errors
Jan 18 2005 23:58:17
Description
Time
--------------
---------
Errors
Jan 18 2005 23:48:19
Errors
Jan 18 2005 23:58:17
Description
An index that uniquely identifies the event.
A comment describing this event.
The time this entry was created.
www.hp.com
HP PC Blade Switch CLI Reference Guide