Show Ports Monitor - HP Bc1500 - BladeSystem - Blade PC Reference Manual

show ports monitor

The show ports monitor User EXEC mode command displays the port monitoring status.
Syntax
show ports monitor
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the port monitoring status.
Console> show ports monitor
Source Port
-----------
1/e1
1/e2
1/e18
HP PC Blade Switch CLI Reference Guide
Destination Port Type
---------------- -----
1/e8 RX,TX
1/e8 RX,TX
1/e8 RX
www.hp.com
Port Monitor Commands
Status VLAN Tagging
------- ------------
Active No
Active No
Active No
17-3