RADIUS Commands
Command Usage
To specify multiple hosts, multiple radius-server host commands can be used.
If no host-specific timeout, retries, deadtime or key-string values are specified, global values
apply to each RADIUS server host.
The address type of the source parameter must be the same as the ip-address parameter.
Example
The following command specifies a RADIUS server host with IP address 192.168.10.1,
authentication request port number 20 and a 20-second timeout period.
Console(config)# radius-server host 192.168.10.1 auth-port 20 timeout 20
19-2
www.hp.com
HP PC Blade Switch CLI Reference Guide