Spanning-Tree Mode - HP Bc1500 - BladeSystem - Blade PC Reference Manual

Spanning-Tree Commands

spanning-tree mode

The spanning-tree mode Global Configuration mode command configures the spanning-tree
protocol. To return to the default configuration, use the no form of this command.
Syntax
spanning-tree mode {stp | rstp| mstp}
no spanning-tree mode
Parameters
■
stp — Indicates that the Spanning Tree Protocol (STP) is enabled.
■
rstp — Indicates that the Rapid Spanning Tree Protocol (RSTP) is enabled.
■
mstp — Indicates that the Multiple Spanning Tree Protocol (RSTP) is enabled.
Default Setting
STP is enabled.
Command Modes
Global Configuration mode
Command Usage
In RSTP mode, the device uses STP when the neighbor device uses STP.
In MSTP mode, the device uses RSTP when the neighbor device uses RSTP and uses STP when
the neighbor device uses STP.
Example
The following command configures the spanning-tree protocol to RSTP.
Console(config)# spanning-tree mode rstp
22-2 www.hp.com HP PC Blade Switch CLI Reference Guide