spanning-tree mst configuration
The spanning-tree mst configuration Global Configuration mode command enables
configuring an MST region by entering the Multiple Spanning Tree (MST) mode.
Syntax
spanning-tree mst configuration
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
All devices in an MST region must have the same VLAN mapping, configuration revision
number and name.
Example
The following command configures an MST region.
Console(config)# spanning-tree mst configuration
console(config-mst) # instance 1 add vlan 10-20
console(config-mst) # name region1
console(config-mst) # revision 1
HP PC Blade Switch CLI Reference Guide
www.hp.com
Spanning-Tree Commands
22-19