Name (Mst) - HP Bc1500 - BladeSystem - Blade PC Reference Manual

name (mst)

The name
MST
default setting, use the no form of this command.
Syntax
name string
Parameters
■
string — MST configuration name. Case-sensitive (Range: 1-32 characters).
Default Setting
The default name is a bridge ID.
Command Mode
MST Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command defines the configuration name as region1.
console(config) # spanning-tree mst configuration
console(config-mst) # name region 1
HP PC Blade Switch CLI Reference Guide
Configuration mode command defines the configuration name. To return to the
www.hp.com
Spanning-Tree Commands
22-21