Snmp-Server User - HP Bc1500 - BladeSystem - Blade PC Reference Manual

snmp-server user

The snmp-server user Global Configuration mode command configures a new SNMP Version 3
user. To remove a user, use the no form of this command.
Syntax
snmp-server user username groupname [remote engineid-string] [auth-md5 password |
auth-sha password | auth-md5-key md5-des-keys | auth-sha-key sha-des-keys]
no snmp-server user username [remote engineid-string]
Parameters
■
username — Specifies the name of the user on the host that connects to the agent. (Range:
1-30 characters)
■
groupname — Specifies the name of the group to which the user belongs. (Range: 1-30
characters)
■
engineid-string — Specifies the engine ID of the remote SNMP entity to which the user
belongs. The engine ID is a concatenated hexadecimal string. Each byte in the hexadecimal
character string is two hexadecimal digits. Each byte can be separated by a period or colon.
(Range: engineID must contain from 9 through 64 hexadecimal digits)
■
auth-md5 password — Indicates the HMAC-MD5-96 authentication level. The user should
enter a password for authentication and generation of a DES key for privacy. (Range: 1-32
characters)
■
auth-sha password — Indicates the HMAC-SHA-96 authentication level. The user should
enter a password for authentication and generation of a DES key for privacy. (Range: 1-32
characters)
■
auth-md5-key md5-des-keys — Indicates the HMAC-MD5-96 authentication level. The user
should enter a concatenated hexadecimal string of the MD5 key (MSB) and the privacy key
(LSB). If authentication is only required, 16 bytes should be entered; if authentication and
privacy are required, 32 bytes should be entered. Each byte in the hexadecimal character
string is two hexadecimal digits. Each byte can be separated by a period or colon. (16 or 32
bytes)
■
auth-sha-key sha-des-keys—Indicates the HMAC-SHA-96 authentication level. The user
should enter a concatenated hexadecimal string of the SHA key (MSB) and the privacy key
(LSB). If authentication is only required, 20 bytes should be entered; if authentication and
privacy are required, 36 bytes should be entered. Each byte in the hexadecimal character
string is two hexadecimal digits. Each byte can be separated by a period or colon. (20 or 36
bytes)
Default Setting
No group entry exists.
Command Mode
Global Configuration mode
Command Usage
If auth-md5 or auth-sha is specified, both authentication and privacy are enabled for the user.
HP PC Blade Switch CLI Reference Guide www.hp.com
SNMP Commands
21-5