show bridge address-table static
The show bridge address-table static Privileged EXEC mode command displays statically
created entries in the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface | port-channel
port-channel-number]
Parameters
■
vlan — Specifies a valid VLAN, such as VLAN 1.
■
interface — A valid Ethernet port.
■
port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays all static entries in the bridge-forwarding database.
Console# show bridge address-table static
Aging time is 300 sec
VLAN
----
1
1
200
HP PC Blade Switch CLI Reference Guide
MAC Address
-----------------
00:60:70:4C:73:FF
00:60.70.8C.73:FF
00:10:0D:48:37:FF
www.hp.com
Address Table Commands
Port
Type
----
-----------------
1/e8
Permanent
1/e8
delete-on-timeout
1/e9
delete-on-reset
5-15