Terminal Data-Dump - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
User Interface Commands
terminal data-dump
The terminal data-dump User EXEC mode command enables dumping all the output of a show
command without prompting. To disable dumping, use the no form of this command.
Syntax
terminal data-dump
no terminal data-dump
Parameters
There are no parameters for this command.
Default Setting
Dumping is disabled.
Command Mode
User EXEC mode
Command Usage
By default, a More prompt is displayed when the output contains more lines than can be
displayed on the screen. Pressing the Enter key displays the next line; pressing the Spacebar
displays the next screen of output. The data-dump command enables dumping all output
immediately after entering the show command.
This command is relevant only for the current session.
Example
The following command dumps all output immediately after entering a show command.
Console> terminal data-dump
27-10
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
