Show Sntp Configuration - HP Bc1500 - BladeSystem - Blade PC Reference Manual

show sntp configuration

The show sntp configuration Privileged EXEC mode command shows the configuration of the
Simple Network Time Protocol (SNTP).
Syntax
show sntp configuration
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the current SNTP configuration of the device.
Console# show sntp configuration
Polling interval: 7200 seconds
MD5 Authentication keys: 8, 9
Authentication is required for synchronization.
Trusted Keys: 8, 9
Unicast Clients: Enabled
Unicast Clients Polling: Enabled
Server
-----------
176.1.1.8
176.1.8.179
Broadcast Clients: Enabled
Anycast Clients: Enabled
Broadcast and Anycast Interfaces: 1/e1, 1/e3
HP PC Blade Switch CLI Reference Guide
Polling Encryption Key
------- --------------
Enabled 9
Disabled Disabled
www.hp.com
Clock Commands
6-17