Tacacs-Server Source-Ip - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
tacacs-server source-ip
The tacacs-server source-ip Global Configuration mode command configures the source IP
address to be used for communication with TACACS+ servers. To return to the default
configuration, use the no form of this command.
Syntax
tacacs-server source-ip source
no tacacs-server source-ip source
Parameters
■
source — Specifies the source IP address.
Default Setting
The source IP address is the address of the outgoing IP interface.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command specifies the source IP address.
Console(config)# tacacs-server source-ip 172.16.8.1
HP PC Blade Switch CLI Reference Guide
www.hp.com
TACACS+ Commands
26-5
Advertisement
Table of Contents
