Show Bridge Address-Table - HP Bc1500 - BladeSystem - Blade PC Reference Manual

Address Table Commands

show bridge address-table

The show bridge address-table Privileged EXEC mode command displays all entries in the
bridge-forwarding database.
Syntax
show bridge address-table [vlan vlan] [ethernet interface | port-channel
port-channel-number]
Parameters
■
vlan — Specifies a valid VLAN, such as VLAN 1.
■
interface — A valid Ethernet port.
■
port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
Internal usage VLANs (VLANs that are automatically allocated on ports with a defined Layer 3
interface) are presented in the VLAN column by a port number and not by a VLAN ID.
"Special" MAC addresses that were not statically defined or dynamically learned are displayed
in the MAC address table. This includes, for example, MAC addresses defined in ACLs.
Example
The following command displays all classes of entries in the bridge-forwarding database.
Console# show bridge address-table
Aging time is 300 sec
Interface
---------
1
1
200
5-14
MAC Address Port
-------------- ----
00:60:70:4C:73:FF 5/e8
00:60:70:8C:73:FF 5/e8
00:10:0D:48:37:FF 5/e9
www.hp.com
Type
-------
dynamic
dynamic
static
HP PC Blade Switch CLI Reference Guide