Ip Host - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
IP Addressing Commands
ip host
The ip host Global Configuration mode command defines static host name-to-address mapping
in the host cache. To remove the name-to-address mapping, use the no form of this command.
Syntax
ip host name address
no ip host name
Parameters
■
name — Name of the host (Range: 1-158 characters)
■
address — Associated IP address.
Default Setting
No host is defined.
Command Mode
Global Configuration mode
Command Usage
Up to 8 host names can be configured.
Example
The following command defines a static host name-to-address mapping in the host cache.
Console(config)# ip host accounting.Marvell.com 176.10.23.1
11-12
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
