GVRP Commands
gvrp vlan-creation-forbid
The gvrp vlan-creation-forbid Interface Configuration (Ethernet, port-channel) mode command
disables dynamic VLAN creation or modification. To enable dynamic VLAN creation or
modification, use the no form of this command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Parameters
There are no parameters for this command.
Default Setting
Dynamic VLAN creation or modification is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
This command forbids dynamic VLAN creation from the interface. The creation or modification
of dynamic VLAN registration entries as a result of the GVRP exchanges on an interface are
restricted only to those VLANs for which static VLAN registration exists.
Example
The following command disables dynamic VLAN creation on Ethernet port 1/e6.
Console(config)# interface ethernet 1/e6
Console(config-if)# gvrp vlan-creation-forbid
9-4
www.hp.com
HP PC Blade Switch CLI Reference Guide