snmp-server v3-host
The snmp-server v3-host Global Configuration mode command specifies the recipient of
Simple Network Management Protocol Version 3 notifications. To remove the specified host, use
the no form of this command.
Syntax
snmp-server v3-host {ip-address | hostname} username [traps | informs] {noauth | auth |
priv} [udp-port port] [filter filtername] [timeout seconds] [retries retries]
no snmp-server host {ip-address | hostname} username [traps | informs]
Parameters
■
ip-address — Specifies the IP address of the host (targeted recipient).
■
hostname — Specifies the name of the host. (Range:1-158 characters)
■
username — Specifies the name of the user to use to generate the notification. (Range: 1-25)
■
traps — Indicates that SNMP traps are sent to this host.
■
informs — Indicates that SNMP informs are sent to this host.
■
noauth — Indicates no authentication of a packet.
■
auth — Indicates authentication of a packet without encrypting it.
■
priv — Indicates authentication of a packet with encryption.
■
port — Specifies the UDP port of the host to use. If unspecified, the default UDP port
number is 162. (Range: 1-65535)
■
filtername — Specifies a string that defines the filter for this host. If unspecified, nothing is
filtered. (Range: 1-30 characters)
■
seconds — Specifies the number of seconds to wait for an acknowledgment before resending
informs. If unspecified, the default timeout period is 15 seconds. (Range: 1-300)
■
retries — Specifies the maximum number of times to resend an inform request. If
unspecified, the default maximum number of retries is 3. (Range: 1-255)
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
A user and notification view are not automatically created. Use the snmp-server user,
snmp-server group and snmp-server view Global Configuration mode commands to generate a
user, group and notify group, respectively.
Example
The following command configures an SNMPv3 host.
Console(config)# snmp-server v3-host 192.168.0.20 john noauth
HP PC Blade Switch CLI Reference Guide
www.hp.com
SNMP Commands
21-13