boot system
The boot system Privileged EXEC mode command specifies the system image that the device
loads at startup.
Syntax
boot system {image-1 | image-2}
Parameters
■
image-1 — Specifies image 1 as the system startup image.
■
image-2 — Specifies image 2 as the system startup image.
Default Setting
The command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
Use the show bootvar command to find out which image is the active image.
Example
The following command loads system image 1 at device startup.
Console# boot system image-1
HP PC Blade Switch CLI Reference Guide
Configuration and Image File Commands
www.hp.com
7-5