Wrr-Queue Threshold - HP Bc1500 - BladeSystem - Blade PC Reference Manual

QoS Commands

wrr-queue threshold

The wrr-queue threshold Global Configuration mode command assigns queue thresholds
globally. To return to the default configuration, use the no form of this command.
Syntax
qos wrr-queue threshold gigabitetherne
no qos wrr-queue threshold gigabitethernet queue-id
no qos wrr-queue threshold tengigabitethernet queue-id
Parameters
■
gigabitethernet — Indicates that the thresholds are to be applied to Gigabit Ethernet ports.
■
queue-id — Specifies the queue number to which the threshold is assigned.
■
threshold-percentage 0,1,2 — Specifies the queue threshold percentage value. Each value is
separated by a space. (Range: 0-100)
Default Setting
80 percent for all thresholds.
Command Mode
Global Configuration mode.
Command Usage
The packet refers to a certain threshold by the conformance level. If threshold 0 is exceeded,
packets with the corresponding DP (Drop Precedence) are dropped until the threshold is no
longer exceeded. However, packets assigned to threshold 1 or 2 continue to be queued and sent as
long as the second or third threshold is not exceeded.
Example
The following command assigns a threshold of 80 percent to WRR queue 1.
Console (config)# qos wrr-queue threshold gigabitethernet 1
18-22
queue-id threshold-percentage
t
www.hp.com HP PC Blade Switch CLI Reference Guide