Crypto Certificate Generate - HP Bc1500 - BladeSystem - Blade PC Reference Manual

crypto certificate generate

The crypto certificate generate Global Configuration mode command generates a self-signed
HTTPS certificate.
Syntax
crypto certificate [number] generate [key-generate [length]] [cn common- name] [ou
organization-unit] [or organization] [loc location] [st state] [cu country] [duration days]
Parameters
■
number — Specifies the certificate number. (Range: 1-2)
■
key-generate — Regenerate the SSL RSA key.
■
length — Specifies the SSL RSA key length. (Range: 512-2048)
■
common- name — Specifies the fully qualified URL or IP address of the device.
(Range: 1-64)
■
organization — Specifies the organization name. (Range: 1-64)
■
organization-unit — Specifies the organization-unit or department name. (Range: 1-64)
■
location — Specifies the location or city name. (Range: 1-64)
■
state — Specifies the state or province name. (Range: 1-64)
■
country — Specifies the country name. (Range: 2-2)
■
days — Specifies number of days certification is valid. (Range: 30-3650)
Default Setting
The Certificate and SSL's RSA key pairs do not exist.
If no certificate number is specified, the default certificate number is 1.
If no RSA key length is specified, the default length is 1024.
If no URL or IP address is specified, the default common name is the lowest IP address of the
device at the time that the certificate is generated.
If the number of days is not specified, the default period of time that the certification is valid is
365 days.
Command Mode
Global Configuration mode
Command Usage
The command is not saved in the device configuration; however, the certificate and keys
generated by this command are saved in the private configuration (which is never displayed to the
user or backed up to another device).
Use this command to generate a self-signed certificate for the device.
If the RSA keys do not exist, parameter key-generate must be used.
HP PC Blade Switch CLI Reference Guide www.hp.com
Web Server Commands
29-5