Snmp-Server Enable Traps - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
snmp-server enable traps
The snmp-server enable traps Global Configuration mode command enables the device to send
SNMP traps. To disable SNMP traps, use the no form of the command.
Syntax
snmp-server enable traps
no snmp-server enable traps
Parameters
There are no parameters for this command.
Default Setting
SNMP traps are enabled.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command enables SNMP traps.
Console(config)# snmp-server enable traps
HP PC Blade Switch CLI Reference Guide
www.hp.com
SNMP Commands
21-9
Advertisement
Table of Contents
