Show Ports Security Addresses - HP Bc1500 - BladeSystem - Blade PC Reference Manual

show ports security addresses

The show ports security addresses Privileged EXEC mode command displays the current
dynamic addresses in locked ports.
Syntax
show ports security addresses [ethernet interface | port-channel port-channel-number]
Parameters
■
interface — A valid Ethernet port.
■
port-channel-number — A valid port-channel number
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC Mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the dynamic addresses in currently locked ports.
Console# show ports security addresses
Port
----
1/e1
1/e2
1/e3
1/e4
1/e5
1/e6
ch1
ch2
The following command displays the dynamic addresses in currently locked port 1/e1.
Console# show ports security addresses ethernet 1/e1
Port
----
1/e1
HP PC Blade Switch CLI Reference Guide
Status Learning
-------- --------
Disabled Lock
Disabled Lock
Enabled Max-addresses
Port is a member in port-channel ch1
Disabled Lock
Enabled Max-addresses
Enabled Max-addresses
Enabled Max-addresses
Status Learning
-------- --------
Disabled Lock
Current
-------
-
-
0
-
0
0
0
Current
-------
-
www.hp.com
Address Table Commands
Maximum
-------
1
1
1
1
10
50
128
Maximum
-------
1
5-21