Spanning-Tree Commands; Spanning-Tree - HP Bc1500 - BladeSystem - Blade PC Reference Manual

spanning-tree

The spanning-tree Global Configuration mode command enables spanning-tree functionality. To
disable spanning-tree functionality, use the no form of this command.
Syntax
spanning-tree
no spanning-tree
Parameters
There are no parameters for this command.
Default Setting
Spanning-tree is enabled. The MSTP-RSTP conversion parameter is enabled, which maps
VLAN 1 to instance 1 and VLAN 2 to instance 2. This default provides interoperability with
PVST/PVST+ by treating each MSTP instance as a separate spanning tree using standard RSTP
and STP BPDUs.
Command Modes
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command enables spanning-tree functionality.
Console(config)# spanning-tree
HP PC Blade Switch CLI Reference Guide

Spanning-Tree Commands

www.hp.com
22
22-1