D-Link DWS-3160-24TC Reference Manual page 452

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Source Prefix
Source Prefix Mask
Source L4 Port
Destination Prefix
Destination Prefix Mask
Destination L4 Port
Flow Label
IP DSCP Service
Click the Create Rule button to add a new rule.
Click the Cancel button to discard the configuration.
After clicking the Rule ID hyperlink or the Edit button, the following page appears:
The fields that can be configured are described below:
Parameter
Action
Match Every
Protocol
Enter an IPv6 prefix and a packet's source IPv6 prefix must match the address
entered.
Enter the source IPv6 mask.
Use the drop-down menu to select L4 keyword of source ports to match a packet's
TCP/UDP source port. When selecting Other, the Source Port Value field
appears. Enter a value in the field.
Enter an IPv6 prefix and a packet's destination port IPv6 prefix must match the
address entered.
Enter the destination IPv6 mask.
Use the drop-down menu to select L4 keyword of destination ports to match a
packet's TCP/UDP destination port. When selecting Other, Destination Port
Value appears. Enter a value in the field.
Enter a value of IPv6 flow label.
Select one of the DSCP keyword values from the IP DSCP drop-down menu. When
selecting Other, the IP DSCP Value field appears. Enter a value in the field.
Figure 4-14 IPv6 Access Control Lists – Edit Rule window
Description
Tick the check box and use the drop-down menu to select the ACL forwarding
action.
Tick the check box and use the drop-down menu to select True or False. True
means that all packets will match the selected IPv6 ACL and Rule, and will be
either permitted or denied. When True is selected, the option of configuring other
match criteria will not be offered since all packets match the rule. To configure
specific match criteria for the rule, select False to configure the other match criteria.
Tick the check box and use the drop-down menu to select a packet's IP protocol to
match condition for the selected IP ACL rule. When selecting Other, the Protocol
Value field appears. Enter a value in the field.
447