D-Link DWS-3160-24TC Reference Manual page 396

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
L3/IP Discovery
IP List
IP Address
L2/VLAN Discovery
VLAN List
VLAN (1-4094)
Enter the information in IP Address or VLAN and click the corresponding Add button to add the entry to the list.
Select one or more entries in the IP List or VLAN List and click the corresponding Delete button to remove entries
from the list.
Click the Apply button to accept the changes made.
After clicking the Profile tab, the following page will appear:
Figure 3-2 Basic Setup Discovery window
Description
Tick the check box to enable IP-based discovery of access points and peer
wireless switches. Deselect the check box to disable it.
Display the list of IP addresses configured for discovery. Select one or more entries
and click the Delete button to remove entries from the list.
Enter an IP address to add the IP address to the IP List. The maximum entries to
be entered is 256.
Tick the check box to enable L2/VLAN discovery. Deselect the check box to disable
it. The maximum entries to be entered is 16.
Display the list of VLAN for discovery.
Enter the VLAN ID to add the VLAN to the VLAN List.
391