Wlan; Section 3 Wlan; Chapter 1 Security; Captive Portal (Cp) - D-Link DWS-3160-24TC Reference Manual

Dws-3160 series web ui reference guide gigabit ethernet unified switch
Hide thumbs Also See for DWS-3160-24TC:
Table of Contents

Advertisement

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Section 3
This section describes all the available configurations in the WLAN tab.
Chapter 1

Captive Portal (CP)

Captive Portal (CP)
Captive Portal (CP) is the feature that controls the accessibility of both wired and wireless users to the network.
The verification can be configured to allow access for guests and authenticated users in this section.
NOTE: The Captive Portal (CP) folder is also accessible from the LAN tab in the navigation window.
Any configuration within this folder will be exactly the same as the Captive Portal (CP) folder
in the LAN tab.
Global Configuration
This window is used to globally configure the CP settings.
To view this window, click Security > Captive Portal (CP) > Global Configuration as shown below:
The fields that can be configured or displayed are described below:
Parameter
CP Global State
CP Global
Operational Status
CP Global Disable
Reason
Additional HTTP Port
(0-65535)
Additional HTTP
Secure Port (0-65535)

WLAN

Security
Figure 1-1 Global Configuration window
Description
Click the radio buttons to enable or disable the CP global state.
Display the status of the CP operational status.
When captive portal is disabled, the field displays the reason being disabled.
Available reasons are: Administrator Disabled, IP Address Not Configured, No IP
Routing Interface and Routing Disabled.
Enter the additional HTTP port number between 0 and 65535, except 80 and 443. 80
is reserved for HTTP default port, and 443 is reserved for HTTPS default port. The
default value is 0 which represents that no additional port is used, and the default port
(80) is used.
Enter the additional HTTPS port number between 0 and 65535, except 80 and 443.
80 is reserved for HTTP default port, and 443 is reserved for HTTPS default port. The
default value is 0 which represents that no additional port is used, and the default port
(443) is used.
312

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dws-3160 seriesDws-3160-24pc

Table of Contents