D-Link DWS-3160-24TC Reference Manual page 405

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the MAC Address hyperlink, the following page will appear:
Figure 3-8 Basic Setup Valid AP – Valid Access Point Configuration window
The fields that can be configured are described below:
Parameter
MAC Address
AP Mode
Description
Use the drop-down menu to select the MAC address of the AP.
Use the drop-down menu to select one of the three AP modes.
Managed
Select this to have the AP being part of the D-Link Unified Switch,
and it can be managed by the Unified Switch. When Managed is
selected, the following options appear at the bottom half of the
page:
Authentication Password – Tick the Edit check box and enter
the password for the AP to authenticate itself with the switch
upon discovery.
Profile - Use the drop-down menu to select an AP profile to
assign to the AP.
Channel - Use the drop-down menu to select the portion of the
radio spectrum that the radio uses for transmitting and receiving.
Select Auto to automatically scan for the available RF signal to
use.
Power - Enter a number in percentage to set the power level
which affects how far an AP broadcasts its RF signal.
400