D-Link DWS-3160-24TC Reference Manual page 369

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be displayed are described below:
Parameter
MAC Address
Detected IP Address
NetBIOS Name
SSID
BSSID
Channel
Status
Network Time
Tick the specific check box and click the Disassociate button to disassociate the client from the managed AP.
Click the Disassociate All button to disassociate all clients from the managed AP.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Detail tab under the Status tab, the following page will appear:
Figure 2-34 Associated Clients Status - Summary window
Description
The Ethernet address of the client station. If the MAC address is followed by an
asterisk (*), the client is associated with an AP managed by a peer switch.
Display the IPv4 address of the client.
The NetBIOS name of the wireless client. For Microsoft Windows hosts, the NetBIOS
name is typically the same as, or based on the host name of the client.
The network on which the client is connected.
The Ethernet MAC address for the managed AP VAP where this client is associated.
The operating channel for the client association.
Display whether or not the client has associated and/or authenticated. The valid
values are:
•
Associated - The client is current associated to the managed AP.
•
Authenticated - The client is currently associated and authenticated to the
managed AP.
•
Disassociated - The client has disassociated from the managed AP, if the client
does not roam to another managed AP within the client roam timeout, it will be
deleted.
Display the amount of time that has passed since this client first authenticated with
the network.
364