D-Link DWS-3160-24TC Reference Manual page 318

Dws-3160 series web ui reference guide gigabit ethernet unified switch
Hide thumbs Also See for DWS-3160-24TC:
Table of Contents

Advertisement

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Peer Switch Statistics
Reporting Interval
(15-3600)
Authentication
Timeout (60-600)
Click the Apply button to accept the changes made for each individual section.
CP Configuration
This window is used to create CP configuration.
To view this window, click Security > Captive Portal (CP) > CP Configuration as shown below:
The fields that can be configured or displayed are described below:
Parameter
CP Configuration
Configuration
Mode
Protocol
Verification
Languages
Click the Add button to add a new entry based on the information entered.
Tick the check box of the specific entry, and click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the link under Configuration in the table, or the tab to configure the detail information about CP configuration.
When clustering is supported on the switch, enter an interval that the peer switches
send its authenticated client statistics to the Cluster Controller periodically. The
reporting interval is in the range of 0, 15-3600 seconds. The value 0 means the
function is disabled. The default value is 120.
Enter a time for authentication. If a CP user does not enter valid credentials within the
time, the authentication page needs to be served again in order for the client to gain
access to the network. The value is between 60 and 600 seconds.
Figure 1-2 CP configuration - CP Summary window
Description
Enter a name of CP configuration.
Display the captive portal ID and name.
Display whether the CP is enabled.
Display whether the portal uses HTTP or HTTPS.
Display which type of user verification to perform.
Guest - The user does not need to be authenticated by a database.
Local - The switch uses a local database to authenticated users.
RADIUS - The switch uses a database on a remote RADIUS server to
authenticate users.
Display the number of languages that are configured for this captive portal.
313

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dws-3160 seriesDws-3160-24pc

Table of Contents