Advanced Configuration - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Address
New Backup IP
Address
Profile ID
Click the Apply button to accept the changes made.
Click the Delete button to remove the entry.
Click the Provision the AP button to perform provisioning.

Advanced Configuration

Global
This window is used to configure wireless advanced settings.
To view this window, click Administration > Advanced Configuration > Global as shown below:
The fields that can be configured are described below:
Parameter
Peer Group ID
Client Roam Timeout
(secs)
Ad Hoc Client Status
Timeout (hours)
AP Failure Status
Timeout (hours)
MAC Authentication
Mode
provisioned.
Tick the check box and enter IP address of the backup switch that the AP to be
provisioned.
Use the drop-down menu to select the profile ID to be used when provisioning.
Figure 3-22 Global General window
Description
Enter a peer group ID to configure wireless switches as peers. Peer switches share
some information about APs and allow L3 roaming among them.
Enter a time in second to determine how long to keep an entry in the Associated
Client Status list after a client has disassociated.
Enter a time in hour to determine how long to keep an entry in the Ad Hoc Client
Status list.
Enter a time in hour to determine how long to keep an entry in the AP
Authentication Failure Status list.
Select the global action to take on wireless clients in the white-list or black-list.
white-list – Specify that any wireless clients with MAC addresses, specified in the
Known Client database and not explicitly denied access, are granted access. If the
MAC address is not in the database then the access to the client is denied.
black-list - Select this option to specify that any wireless clients with MAC
411