D-Link DWS-3160-24TC Reference Manual page 339

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Use the drop-down menu to select a Switch to view the information.
The fields that can be displayed are described below:
Parameter
Total Access Points
Total Clients
Managed Access Points
Authenticated Clients
Discovered Access
Points
IP Address
Connection Failed
Access Points
Cluster Priority
Maximum Managed
Access Points
Distributed Tunnel
Clients
WLAN Utilization
WLAN Bytes
Figure 2-2 Switch Status window
Description
Total number of Managed APs in the database. This value is always equal to the
sum of Managed Access Points, Connection Failed Access Points, and Discovered
Access Points.
Total number of clients in the database. This total includes clients with an
Associated, Authenticated, or Disassociated status.
Number of APs in the managed AP database that are authenticated, configured,
and have an active connection with the wireless switch.
Total number of clients in the associated client database with an Authenticated
status.
APs that have a connection with the switch, but haven't been completely
configured. This value includes all managed APs with a Discovered or
Authenticated status.
IP address of the switch.
Number of APs that were previously authenticated and managed, but currently
don't have connection with the wireless switch.
Cluster priority value of the switch.
The switch with highest priority in a cluster becomes the Cluster Controller. If the
priority is the same, the switch with lowest IP address becomes the Cluster
Controller. A priority of 0 means that the switch cannot become the Cluster
Controller.
Maximum number of access points that can be managed by the switch.
Total number of clients that are associated with an AP that are using distributed
tunneling.
Total network utilization across all APs managed by this switch. This is based on
global statistics.
Total bytes transmitted across all APs managed by the switch.
334