Snmp Trap Configuration - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Use the drop-down menu to select a CP to see the information of the clients connected to the CP.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

SNMP Trap Configuration

This window is used to configure whether or not SNMP traps are sent from the Captive Portal and to specify
captive portal events that will generate a trap.
To view this window, click Security > Captive Portal (CP) > SNMP Trap Configuration as shown below:
The fields that can be configured are described below:
Parameter
Client Authentication
Failure Traps
Client Connection
Traps
Client Database Full
Traps
Client Disconnection
Traps
Click the Apply button to accept the changes made for each individual section.
Figure 11-87 CP-Client Status window
Figure 11-88 SNMP Trap Configuration window
Description
Use the drop-down menu to enable or disable the SNMP agent sending a trap when a
client attempts to authenticate with a captive portal but is unsuccessful.
Use the drop-down menu to enable or disable the SNMP agent sending a trap when a
client authenticates with and connects to a captive portal.
Use the drop-down menu to enable or disable the SNMP agent sending a trap each
time an entry cannot be added to the client database because it is full.
Use the drop-down menu to enable or disable the SNMP agent sending a trap when a
client disconnects from a captive portal.
264