D-Link DWS-3160-24TC Reference Manual page 411

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Click the radio buttons to select the radio frequency in order to see its channel plan.
Click the Apply button to accept the proposed channel change.
Click the Clear button to remove the entries.
Click the Start button to manually run the channel plan adjustment feature.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Manual Power Adjustments tab, the following page will appear:
The fields that can be displayed are described below:
Parameter
Current Status
AP MAC Address
Location
Radio
Current Power
New Power
Click the Apply button to accept the proposed power.
Click the Clear button to remove the entries.
Click the Start button to manually run the power adjustment feature.
Figure 3-14 RF Management Manual Power Adjustments window
Description
Display the Current Status of the plan.
•
None - The power adjustment algorithm has not been manually run since
the last switch reboot.
•
Algorithm In Progress - The power adjustment algorithm is running.
•
Algorithm Complete - The power adjustment algorithm has finished running.
•
Apply In Progress - The switch is adjusting the power levels that the APs
use.
•
Apply Complete - The algorithm and power adjustment are complete.
Display the AP MAC address.
Display the location of the AP, which is set in the Valid AP database.
Display the radio.
Display the current power level for the AP.
Display the proposed power level for the AP.
406